Optical crystals, laser crystals, nonlinear optical crystals, electro-optical crystals, piezoelectric crystals, scintillation crystals, and magneto-optical crystals are all examples of photoelectric functional crystals. Its job is to take in optical impul...

The CS51411 demonstration board is a 1.0 A/3.3 V buck regulator that operates at 260 or 520 kHz (CS51413). By providing clock signals to the SYNC input, the switching frequency may be synced to a higher frequency.

International Rectifier's Sophisticated HEXFET Power MOSFETs use advanced processing techniques to provide extraordinarily low on-resistance per silicon area. This feature, when paired with the high switching speed and ruggedized device architecture that...

The PIC18F452-I/P is a microcontroller with high performance. Its robust 10 MIPS and easy-to-program CMOS Flash-based 8-bit microcontroller combines robust design into a 40- or 44-pin device. It offers a seamless transition process for software up to mor...

Planar technology is used to create the devices, which have a "base island" arrangement and a monolithic Darlington configuration. The transistors that result have an outstanding high gain performance and a very low saturation voltage.

This low-cost sensor provides a non-contact measurement range of 2cm to 400cm with a ranging accuracy of up to 3mm. Each HC-SR04 module has an ultrasonic transmitter, a receiver, and a control circuit.

The MCP4901/4911/4921 devices are single-channel 8-bit, 10-bit, and 12-bit buffered voltage output Digital-to-Analog Converters (DACs).

Over a 1.2V to 33V output range, the LM150 series of adjustable 3-terminal positive voltage regulators can produce more than 3A. They're quite simple to use, with only two external resistors needed to set the output voltage. Furthermore, discrete designs...

The ADC080X series of A/D converters use a modified potentiometric ladder and is designed to work with the 8080A control bus through three-state outputs. No interfacing logic is required because these converters appear to the processor as memory locations...

The TL07x series of JFET-input operational amplifiers are similar to the TL08x series in that they have low input bias and offset currents and a quick slew rate. The TL07x series' low harmonic distortion and noise make it perfect for high-fidelity and aud...

The ESP-WROOM-32 is a versatile Wi-Fi+BT+BLE MCU module that can handle a broad range of functions, from low-power sensor networks to the most demanding operations like voice encoding, music streaming, and MP3 decoding.

The IRS2092 is a Class D audio amplifier driver with a PWM modulator and protection that operates at a high voltage and high performance. A full Class D audio amplifier with protection may be produced using two external MOSFETs and a few additional compon...

The TMC2130 is a high-performance two-phase stepper motor driver IC. SPI and STEP/DIR standards make communication easier. TRINAMIC's advanced stealth chip chopper assures quiet operation while providing optimum efficiency and motor output.

The three-terminal positive regulators of the KA78XXAE series are available in the TO-220/D-PAK package with a variety of fixed-output voltages, making them suitable for a wide range of applications. Internal current limiting, thermal shut-down, and a saf...

LEDs (light-emitting diodes) are a type of light-emitting diode. It's made up of gallium (Ga), arsenic (As), phosphorus (P), nitrogen (N), and other elements. Because electrons and holes may create visible light when they recombine, they can be employed t...