The MC33063A and MC34063A are simple dc-dc converter ICs that contain all of the primary circuitry required. An internal temperature-compensated reference, a comparator, an oscillator, a PWM controller with active current limiting, a driver, and a high-cu...

The digital valve adopts an NTC thermistor as a temperature sensor, forms a simple voltage divider circuit with a fixed resistor as a water temperature measurement circuit, and uses the built-in 8-bit A/D converter of the PIC16C71 microcontroller to conve...

The nRF24L01 is a low-power, single-chip 2.4GHz transceiver with an incorporated baseband protocol engine (Enhanced ShockBurstTM). The nRF24L01 is designed to operate in the 2.400 - 2.4835GHz ISM frequency range across the world. To create a radio system...

The BC547 transistor is a famous NPN bipolar kind that is commonly seen in amplification or switching purposes circuits. Available in SMD and TO-92 packages, the part has three pins: emitter, collector, and base. The maximum collector power dissipation i...

The XL6005 LED constant current driver is a fixed frequency PWM Boost (step-up) LED constant current driver capable of controlling Series 1W/3W/5W LED modules with outstanding line and load regulation.

The MOC301XM and MOC302XM family of triac driver devices are optically isolated. A GaAs infrared emitting diode and a light-activated silicon bilateral switch that behaves like a triac are used in these devices. They're made to connect electronic controll...

STMicroelectronics proprietary "Single Feature SizeTM" strip-based technology has yielded this Power MOSFET. The resultant transistor has a high packing density for low resistance, tough avalanche properties, and fewer key alignment stages, resulting in e...

The CD4060BMT counter comprises an oscillator section as well as 14 counter stages with ripples. The oscillator configuration permits the design using either RC as well as Crystal oscillator circuits. RESET input is included that resets the counter back t...

The HEF4520B is a twin 4-bit binary counter with internal synchronization. The counter features active HIGH and LOW clock inputs, as well as buffered outputs from all four-bit locations (nQ0 to nQ3) and an active HIGH overriding asynchronous master reset...

The CD4053BMT analog multiplexer is controlled digitally analog switches. It has a low ON impedance, and a very low leakage current OFF. It has three digital control inputs containing A B, C, and as well as an inhibit input. Each control input can select...

The CD4069UBE comprises CMOS inverter circuits. It is designed for all general-purpose inverter systems. It comes with standard symmetrical output features. It meets the specifications in JEDEC preliminary standard No. 13B. It is general use and is suitab...

The PIC12C67X devices are low-cost, high-performance, CMOS, fully-static, 8-bit microcontrollers with integrated analog-to-digital (A/D) converter and EEPROM data memory (EEPROM on PIC12CE67X versions only).

The TL081IP is an op-amp device. It could offer a great value for cost-sensitive applications. It is equipped with various attributes like the low offset and high slew rates and common-mode inputs for the supply positive. It has high ESD,

The edge reasoning Accelerator developed by Flexlogix has a 4k MAC dynamic tensor processor array that can be used for M-pixel image processing models in medical, surveillance, and Internet of things applications.

This LF353 device is a low-cost, high-speed, JFET-input operational amplifier with very low input offset voltage. It requires a low supply current yet maintains a large gain-bandwidth product and a fast slew rate. In addition, the matched high-voltage JFE...