Tips on how to Replace Brake Pads
Brake pads naturally put on out over time. Fortunately, it really is not as difficult to replace them as you may believe. The tools that you just need for this project consist of a lug wrench, c-clamp, adjustable or open wrench, Allen wrenches, hammer, along with a bungee cord. Once you jack up your car, make certain that you've it supported by blocks or jack stands. It can be under no circumstances safe to work on a car that is supported by a jack only. The first thing you should do is get rid of the wheel. The lugs need to be quick to take out, it's most effective to perform so in the bottom up. Get additional facts about стоимость замены колодок
Next, so that you can take away the brake pads you have to initially get rid of the brake caliper. The brake caliper may be situated just above the lug bolts, sitting on major in the brake disc. There's a bolt that keeps the caliper in place. You may remove it quickly using the suitable wrench. You will find distinct forms of bolts that could possibly be keeping it in place, so it truly is a superb thought to possess diverse wrenches handy. Now you could pull the caliper off by pulling directly up. You might should wiggle it a bit so that you can loosen it. Now you are able to sit the caliper some place hassle-free, or use your bungee cord to tie it up.
Now comes the time for you to eliminate the brake pads. They need to basically slide suitable out without the need of providing you any problems. Try to remember how they're attached though, because you'll need to understand this whenever you are installing the fresh ones. In case you are driving an older vehicle, you might need to tap them together with your hammer a little to obtain them unstuck. There could possibly be some smaller metal tabs keeping the pads in location also. In that case, make sure you hang onto them; you will need them when you put the new pads in.
Now you can easily slide your new brake pads in, using the metal tabs to maintain them in location if applicable. Now along with your new pads affixed, you need to adjust the brake piston. This piece of equipment adjusts as your pads wear out as a way to keep your brakes functioning efficiently. To readjust it, you may need your c-clamp. Put the end from the clamp using the screw against the piston. The other end must rest behind the caliper assembly. Now just gradually tighten the clamp till the piston has moved to a point where you could insert the pads quickly.
The next issue you have to do is slide the caliper assembly more than your new pads. Replace the bolts. At this point, it is a fantastic notion to push down the brake petal a couple of occasions in order that you could be assured of one's brake pressure. Now you could replace the wheel plus the lug nuts. It really is a great idea to make certain that the lug nuts are definitely secure. At this point you may have successfully changed the brake pads in your car.
