Canon Pixma TS3322 - The Best All-In-One Printer/Scanner

Canon Ts3322 Wifi Printer Setup

The Canon Ts3322 Printer All-in-One Printer was designed for efficiency. This Canon printer has a flatbed scanner, a two-cartridge FINE Hybrid Ink System, wireless connectivity, and an extra paper tray in addition to printing. The Canon Print app works with smartphones, tablets, laptops, and desktop computers with built-in Wi-Fi. Wi-Fi connection takes only a few seconds.

The TS3322 prints using only two FINE CARTRIDGES, making it easy to use and repair. The built-in Wi-Fi allows printing from PCs, tablets, and cellphones. The Canon Pixma TS3322 setup. This article will show you how to connect your Canon TS3322 and troubleshoot common setup issues.

The Canon Pixma TS3322 can be manually configured.

Setting up your Canon TS3322 printer is the first step to maximizing its performance. Note the SSID name and wireless network key before installing the Canon Pixma TS3322 setup. Before configuring the Canon TS3322 wireless printer manually, please read the following instructions:

1. Turn the printer "on."

2. Easy Wireless Connect on the printer.

3. Hold the Direct button for a few seconds and then let go.

4. Click "Start" on the control panel.

5. Choose "Yes" to accept the License Agreement's terms.

6. By selecting "Next," you can choose a connection method.

7. Select SSIDs from a list of available wireless networks.

8. Fill in the necessary areas with your network's password.

9. After network configuration, follow the on-screen directions.

10. After the Canon TS3322 Setup, click "Complete".

11.  

Cannot print wirelessly on Canon TS3322 What do I do?

Follow the above steps to configure your Canon TS3322 before connecting it to Wi-Fi. Then use the driver CD to set up Wi-Fi on your computer. The Canon TS3322 printer driver is available online. Steps to connect a Canon TS3322 printer to a wireless network:

1. Make sure the printer is on.

2. Hold the power button for a few seconds to switch on your printer.

3. Alternatively, press and hold the "home" button on the printer's Control Panel.

4. Then select Wireless Settings.

5. Go to the Wireless LAN Configuration page to set up your network.

6. From the drop-down menu, select Basic WiFi.

7. Yes.

8. Join a WiFi network.

9. You will be asked for the WiFi network password.

10. Return to the printer's setup program and finish.

11.  

TS 3322 Wireless Setup Mac

Connect your Canon Pixma TS3322 setup printer to your Mac as follows:

1. The control button activates your printer.

2. In the Control Panel, select Wireless Configuration.

3. Opt for wireless internet.

4. Download the printer driver from the Canon website or the CD.

5. Locate the Canon TS3322 driver in your Mac's Downloads folder.

6. Select the next item from the wizard's menu.

7. Setting up Helper is easy. Just connect up with your device's login and password.

8. Select this option to start setting.

9. Next, choose a location.

10. The license agreement requires a yes vote.

11.  

How To Set Up The Canon TS3322 Wireless On Windows

This is how you configure the Canon TS3322 printer on a Windows device:

You can either use the setup file from the CD or download the driver from Canon's website.

1. Once downloaded, open the file and select Start Setup.

2. Verify your location before moving on.

3. The license agreement requires a yes vote.

4. Please accept the survey.

5. Consider the choices below.

6. Then confirm by clicking yes.

7. Choose the finest wireless router for your needs from the list.

8. When finished, click Next.

9. Keep clicking Next until the connection is made.

10. The print button displays a print screen.

11. The computer will assist you through the test print process.

12.  

Replacing the Canon TS3322 Ink Cartridge

Here's how to refill your Canon TS3322 ink cartridges:

1. Make sure the printer is on.

2. Raise the scanning machine's lid.

3. The print head holder will be repositioned.

4. Remove the ink cartridge by withdrawing it and pressing tab A.

5. Ink cartridges are packaged with orange safety tape and protective film.

6. Assemble the Canon TS3322 ink cartridge, ensuring the orange safety cap faces up.

7. Removable orange safety band by lifting tab.

8. Insert the ink cartridge's front end into the print head.

9. Verify that the printer's label matches the ink cartridge label.

10. Remove the ink cartridge by pressing it into place with your finger.

11. Close the scanner's cover.

12. Installed Canon TS3322 ink cartridges.

13.  

My Canon TS3322 printer has stopped printing.

If your Canon Pixma TS3322 is not printing, check the printer-device connection. Before printing, make sure the printer and computer are on the same wireless network. Verify that the printer's settings match the back tray. Finally, clear your printer's print queue. Reinstall the Canon TS3322 Printer Driver if necessary.

What's Wrong With My Canon TS3322?

Your Canon TS3322 scanning issue could be caused by various factors.

The steps below will help you resolve the issue:

1. Install and start the Canon TS3322.

2. Connect your printer's USB wire to a USB port on your computer.

3. Check the network connection. The connection setup can be reset if necessary.

4. After a system reboot, run a file scan.

5.  

My Canon TS3322 Printer Isn't Printing.

The steps below will help you fix your offline error:

1. Open your laptop's Start menu.

2. Start Control Panel and choose it.

3. Select devices and printers in the control panel.

4. Right-click your printer icon and select Use Printer Online from the menu.

How do I set up the Canon TS3322's wifi?

Your Canon Pixma TS3322 setup is complete if you follow the steps below.

1. Setup the printer for Easy Wireless Connect.

2. For a few seconds, hold the Direct key.

3. On the main screen, select Start-up.

4. To proceed, read and accept the Licence Agreement.

5. By selecting "Next," you can choose your preferred connection type.

6. Selected SSIDs are currently available for wireless networks.

7. Enter your wifi network's password here.

8. Please wait until the network settings are complete before continuing.

9. "Complete" when the Canon Pixma TS3322 setup is finished.

How Does The Canon TS3322 Print Quality?

Modify the print quality on your Canon TS3322 by:

1. In the Printer Driver Configuration Wizard, select "Print Quality."

2. Custom is accessible via the Main tab's drop-down menu.

3. Select "Print Quality Level" in the Custom dialogue box and click OK.

4. Before configuring the printer, make sure the print output standard is set appropriately.

The Canon TS3322 printer has a paper jam.

The steps below will help you fix your paper jamming problem: