menu
Basic characteristics of capacitors
Basic characteristics of capacitors
Two conductors close to each other sandwich a non-conductive insulating medium between them, which constitutes a capacitor. When a voltage is applied between the two plates of a capacitor, the capacitor will store charge. The capacitance of a capacitor is numerically equal to the ratio of the amount of charge on one conductive plate to the voltage between the two plates. The basic unit of capacitance of a capacitor is farad (F).

 

(1) Capacitors can store charge and have the function of blocking DC

When the two plates of the capacitor are respectively connected to the positive and negative electrodes of the DC power supply, the positive and negative charges will accumulate on the two electrode plates of the capacitor, forming a voltage between the two plates. With the continuous increase of the charge on the two plates of the capacitor, the voltage on the capacitor gradually increases from small to small. When it is equal to the DC power supply voltage, no current will flow in the circuit and the charging process will stop. This is the charging of the capacitor. effect. If the DC power supply is disconnected from the capacitor, the charge is stored on the capacitor at this time. The amount of charge stored can be calculated by the following formula. When the voltage across the capacitor is constant, the greater the capacity of the capacitor, the amount of charge it stores also bigger. It can be seen that the capacitance of a capacitor is a parameter that measures the capacity of a capacitor to store charges. After the charge is stored on the capacitor, since the two plates of the capacitor are separated by the insulating medium, although there is voltage at both ends of the capacitor, the charge cannot pass between the electrodes, so the capacitor has the function of blocking direct current.

If the two electrodes of a capacitor with stored charge are connected with a wire, at the moment of connection, the positive and negative charges on the capacitor plate will be neutralized by the wire, which is the discharge effect of the capacitor. The process of capacitor discharge is a process of energy release, which will do work in the discharge circuit to convert electrical energy into other types of energy.

When a capacitor is used in an electronic circuit, if the voltage on the electronic circuit is higher than the voltage across the capacitor, the capacitor is charged until the voltage established on the capacitor is equal to the voltage of the circuit; if the voltage on the electronic circuit is lower than the voltage across the capacitor, The capacitor is discharged.

(2) Alternating current can "pass" the capacitor

If the capacitor is connected to an AC circuit, because the magnitude and direction of the AC voltage are constantly changing, the capacitor will be alternately charged and discharged repeatedly. At this time, there is still no charge between the two plates of the capacitor, but it is formed in the AC circuit. The AC current that keeps changing in direction and size is just like a capacitor can pass AC power. This is the reason that AC can "pass" a capacitor.

(3) Capacitive reactance of capacitor

Capacitors have special resistance characteristics to alternating current, called capacitive reactance. The capacitive reactance can be calculated by the following formula. The larger the capacity of the capacitor, the higher the frequency of the current, the smaller its capacitive reactance, and the easier it is for AC current to pass through the capacitor.

If you are interested in the capacitors, you can learn that how does a capacitor charge and discharge on Easybom.