menu
An Introduction of the CD4069UBE CMOS Inverter
An Introduction of the CD4069UBE CMOS Inverter
The CD4069UBE comprises CMOS inverter circuits. It is designed for all general-purpose inverter systems. It comes with standard symmetrical output features. It meets the specifications in JEDEC preliminary standard No. 13B. It is general use and is suitable for logic inversion, pulse shaping, oscillators, and as well as high-input-impedance amplifiers.

Introduction

 

The CD4069UBE comprises CMOS inverter circuits. It is designed for all general-purpose inverter systems. It comes with standard symmetrical output features. It meets the specifications in JEDEC preliminary standard No. 13B. It is general use and is suitable for logic inversion, pulse shaping, oscillators, and as well as high-input-impedance amplifiers.

 

 

Features 

 

Medium speed operation: tPHL, tPLH = 30ns at 10 V

100% tested for quiescent current at 20 V

The maximum input current of 1 µA at 18 V over full package-temperature range, 100nA at 18V and 25°C

 

 

Diagram

 

Diagram

 

 

CAD Model

 

Symbol

Symbol

 

            

PCB Footprints

PCB Footprints

 

 

3D Models

3D Models

 

Specifications

 

Supply Chain

 

Factory Lead Time - 6 Weeks

 

Physical

 

Package / Case - 14-DIP (0.300, 7.62mm)

Weight - 927.99329mg

 

Technical

 

Operating Temperature -   -55°C~125°C

 

 

Circuits of CD4069UBE

 

Circuits of TL431CZ

 

 

Alternative Models 

 

MC14049UBCPG, CD4502BE, CD4009UBE

 

 

Where to Use CD4069UBE?

 

The CD4069UBE CMOS inverter has the benefit of a complementary structure. It is now one of the most popular devices used in digital circuit design. The CMOS inverter is a complement push-pull device made up of P-MOSFET as well as N-MOSFET. N-MOSFET is the driver tube. P-MOSFET is for load tube. The gate of the two transistors is connected to form signals input. The two transistors are connected separately to the source. The N-MOSFET's origin is located in the ground. The p-MOSFET's source voltage is connected to the voltage of the supply. The n-MOSFET connects to the P-MOSFET's drain as an output from the inverter. To manufacture P-MOSFETs and n-MOSFETs in integrated circuits, they must create an insulated P-substrate as well as an n-substrate zone. The CD4069UBE CMOS inverter circuits for CMOS may include other circuits ancillary to it like electrostatic discharge protection circuits as well as latch protection circuits as well as input shaping circuits for Schmidt.

 

 CMOS inverter

 

 

How to Use CD4069UBE?

 

The CD4069UBE CMOS inverter circuit is made up of two MOSFETs with enhanced performance. V1 refers to the NMOS Tube which is also known as the drive tube. V2 is a PMOS tube which is a load tube. The voltage of the gate's source UTN in the NMOS tube is high. Its gate-source source's opening voltage PMOS tube is negative. Its range of values is 2 to 5 V. To allow the circuit to function correctly it is necessary to supply the voltage UDD>(UTN+|UTP|)is needed. The UDD is able to operate from 3 to 18V. It is able to operate in a wider scope of applications.

Click the link to check more details

https://www.easybom.com/blog/a/an-introduction-of-the-cd4069ube-cmos-inverter