Installation - Dépannage - Motorisation.
Vous avez besoin de nos services ? Nous intervenons sur Paris/Région Parisienne - Nous disposons d'un Technicien par département - 10 Ans d’expérience - Devis Gratuit.
Roller doors and shutters give a robust and secure barrier against intruders and destructive climate elements. They're created according to specifications, making sure wonderful fit, smooth operation, and utmost security. Much more importantly, their low maintenance element makes them an economical choice. Nevertheless, these shutters and doors require common checks to ensure they are in superior operating situation. Get additional information and facts about depannage volet roulant 92
Checking for balance need to be performed every month by a skilled technician, preferably somebody licensed and insured. The doors ought to be balanced, being smooth to roll up and down the roller tracks and able to stay stationary at any point along the tracks. Otherwise, the steel doors are out of balance and will need to become adjusted.
Jammed and stiff doors must not be forcibly raised or lowered. Verify individual components which include springs and rollers for damage and have them repaired right away. At instances, all that is definitely required is some cleaning and removal of accumulated debris and dirt.
All moving elements, save for the roller tracks, ought to be lubricated every month. Lubricant facilitates smooth, safe and quite operation, but when placed within the tracks, it attracts extra grime and dirt that disrupts operation. Lubricant likewise increases the life on the moving components, along with the entire security shutter device. Among the essential components that need to have lubrication are bearings, hinges, rollers, and springs.
To prolong the life on the roller tracks and to encourage smooth and really operation, occasionally apply silicon spray. The spray gives the tracks a slippery finish, enabling the doors slide properly. If you would like to lubricate the tracks, use petroleum lubricant, but brush away dirt and grime prior to application and wipe away excess lubricant after.
Automatic doors and shutters really should be set in manual mode annually or semi-annually. Manual operation need to then be predetermined and accomplished in line with manufacturer instructions to stop damage. The assistance brackets needs to be checked if they have to have servicing. If that's the case, it really is often advisable to contact a qualified technician appropriate away.
Springs needs to be re-tensioned periodically, and each time the roller shutter gets abnormally heavy or hard to lift or roll. Prevent operating doors with damaged tension springs since this causes damage to the motor and also the opener.
Steel cables on the sides of the doors should be checked as well whether they're in ideal shape and position or not. Replace protruding and broken cables appropriate away to avoid accidents and worse damage for your doors.
All bolts and fixings must be tight in location. Loose ones can simply snap out of their holes and make the doors unstable and dangerous to operate. When there are loose bolts, don't operate the doors automatically rather, operate in manual mode as a way to control the speed at which the roller doors are moving up or down.
