Basic Methods of Tree Stump Removal in Melbourne
There are lots of trees being cut down nowadays. It may not be quite a healthy process to perform but sometimes it is important to get rid of a tree. Trees are often chopped down from the ground, being cleared for construction, to be used in firewood, making paper or home furniture or often times when it is standing uselessly in some one’s property or garden. People quickly cut off the top part and most of the part of the trunk area, however, skip the stump in the end as it is very hard to cut it off from the ground completely.
Tree Removal companies deal with it quite easily but for people who lack the power or the equipment for this job, let it sit around giving a quite poor view.
To remove a tree stump, here are four simple methods:
- First is and most used approach would be to chemically remove the stump. With this, a chemical substance is used to decay the stump then split it from the ground. The method involves drilling holes inside the diameter of the stump then simply filling them with a concentrate composed by combining water and the chemical together. The concentrate is remained in there for a couple of weeks until it has completely decomposed the stump which makes it soft and squashy. After this, an ax is usually used to cut it off from the ground.
- The second method would be to remove the stump manually. This technique is utilized by people who have plenty of strength to give. A trench type of a hole is dug around the perimeter of the stump reducing and removing out any long-grown roots. The trench must be as deep as the roots go beneath the exterior of the earth. As soon as this has been completed and the stump together with the roots loosens enough to be moved, it will be cleanly pulled out and discarded.
- Then comes the natural approach of handling the stump. Here, the stump is allowed to decompose by itself over a certain amount of time by covering it with fertilizers or soil to quicken the procedure for the fungus to petrify the excess trunk and roots. Once it has totally rotten, it can be easily cut down and cleared away. This method, on the other hand, take quite some time and is only suited to trees that has average or tiny sized trunks.
- The final approach is by using a tree stump grinder to automatically remove the stump. It is a device, which, as the term suggests grinds away the stump. Before using it, a person had to cut the stump as near the ground as possible then simply eliminate all the rocks, pebbles and debris around the area. The grinder is then used to cut away the rest of the left-over stump by chipping away three-inch sections of the wood with the use of a circular toothed blade cutter.
For more information regarding Tree Stump Removal Melbourne, visit our website.
