Garmin Network Cable is the piece of networking gear that links one network device to another, or two or more computers to share printers, scanners, and other resources. Depending on the network's physical layer, topology, and size, many types of network cables are utilized, such as coaxial cable, optical fiber cable, and twisted pair cable. The devices can be separated by a few meters (through Ethernet, for example) or by practically infinite distances (e.g. via the interconnections of the Internet). If you wanna Buy Marine Network Cable you can blindly trust Point Supplies. Network connections are made using a variety of technologies. Patch cables are utilized in offices and wire closets for small distances.
Garmin Maritime Network Cables and Standard Ethernet Cables: What's the Difference?
Garmin Maritime Network connections differ from ordinary Ethernet cables in their construction. The following is a list of the differences:
Garmin Network Cable-
-
Grounding from the outside.
-
Wiring for a crossover.
-
Cable with a shield.
-
Waterproof to IPX7 standards.
-
Drain Wire is pre-installed.
-
The Garmin Marine Network connection employs the identical Tx/Rx pairs for data transmission and the unused pins (4, 5, 7, and 8) for power control of the network's numerous components.
-
Transmit Positive (BI DA+) BI DB+: Receive a positive response.
-
BI DA-:Send Negative BI DA-:Send Negative BI DA-:S Receive Negative with BI DB-.
Ordinary Ethernet Cable -
-
Grounding on the inside.
-
Wiring in parallel.
-
There is no shielding.
-
It is not water-resistant.
-
Similar devices can communicate with one another via crossover wires. (These are Garmin units.)
-
Additionally, many GMS 10's may be linked together to form a larger network.
-
As seen in the figures above, a standard Ethernet connection utilizes pins 1, 2, 3, and 6 for network data, with one pair for Tx and the other for Rx. The rest of the pins aren't in use.
Even though the GPSMAP 4000 series and newer may utilize a standard Ethernet line, Point Supplies exclusively suggest Garmin Cables.
For the finest angling and boating experience, use a Garmin Marine Network Cable to ensure that your accessories may be placed wherever on your rig.
-
Extends the range of your boat's network.
-
Allows you to personalize the location of your boat's electronics.
-
Constructed to withstand the elements.
Advantages Of Marine Communication Cables
There are many advantages of using Garmin Network Cable -
-
The cables can endure rocky seabeds, marine life, tsunamis, volcanoes, and even rare shark.
-
The wires are made to provide high bandwidth and minimal latency.
-
Because the wires are difficult to tap, they provide exceptional dependability and security.
-
In comparison to satellites, these cables are relatively cost-effective.
-
Optical fiber cables, which are used undersea, have a minimal power loss and are impervious to EM (Electro-magnetic) interference.
-
When compared to copper and steel fibers of the same size, they have a higher tensile strength.
-
They are lower in weight and more flexible.
