The relationship with the line is done with 2 filet welds, too at the outside as other than at inside the Raised Faced Slip-On Flanges. Level Faced Slip-On Flanges have a lower material cost than weld neck spine and are everything viewed as the more accommodatingly changed. Our Carbon Steel Slip On Flange Manufacturers workplaces can complete any level of courses of action.
A350 Gr LF3 Slip On Flange
ASME B16.5 Slip On Flange and ASME B16.47 Series b Carbon Steel Slip On Flange may be added to the farthest furthest extents of a line or to at any rate one terminations of a line fittings. treated steel slip on rib is organized so the presented finish of the line or fitting is confounded or short of the spine face by the thickness of the line divider paying little regard to 1/8 of an inch. This considers a filet weld inside the Slip on rib obfuscated from the thickness of the line divider without hurting the rib face.
Specification of Slip on Flanges
| ASME B16.5 Slip On Flange Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
|---|---|
| Slip on threaded flange Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| SORF Flanges Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Slip on pipe flange |
| Slip On Weld Flange Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 SORF Flanges |
| JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Slip On Weld Flange |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar Slip on threaded flange |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar Flat Faced Slip-On Flanges |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized ASME B16.47 SORF Flanges |
| Most common types of Raised Faced Slip-On Flanges | Forged / Threaded / Screwed / Plate |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production technique |
|
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
