If you're like most of us, your pool is the main attraction of your backyard. It's a place where you can relax after a long day at work and enjoy some much-needed time with friends and family. But what happens when winter arrives?
You might think that there's no point in keeping your pool up and running when it's too cold to swim outside, but there are plenty of practical reasons why you should keep your swimming pool ready for spring! Here are top tips for pool servicing Melbourne during this cold season:
Winterising your pool
- Turn off the pool pump.
- Use a hose to drain the pool. This can be done by opening all of your skimmers and draining them into an area that is safe for draining water, like an empty kiddy pool or other basin.
- Remove the cover, vacuum it clean and store it for use next year in a dry place such as a garage or storage unit so that it doesn't become mouldy before next summer (mould loves dark damp places). If you don't have room for storing your cover outside during wintertime then you might want to consider buying one of those heavy duty vinyl covers that comes with its own storage bag so it's easy to take out in springtime when you're ready to put your new cover on!
After your cover has been removed, you can use a pool brush or vacuum to clean the walls and floor of debris and dirt. If you've got a lot of leaves in the water then it might be worth your while to invest in a leaf net that can be attached to your skimmer so that when it's turned on, it will pull up any leaves floating on top of the water.
Draining the pool pump
The first step to winterising your pool is draining the pool pump. This can be accomplished by removing the drain plug located on the bottom of the pump. The drain plug is typically a rubber or plastic stopper that retains water in place until it's removed, at which point it'll release to allow water to flow out through an opening in its center. Once you've located this opening, remove it and allow all remaining water inside of your pump to drain out into a bucket or other suitable container.
Next up: draining your filter! For most people, this process involves removing all visible debris from inside of their filtration system before taking off its lid (or cover) and allowing some excess water to drip out onto grass nearby. Once complete, simply reattach everything back together again before moving on!
Now that you know how to winterise your pool pump and filter, it's time to start thinking about draining your pool itself—but don't worry! This pool servicing Melbourne process is much easier than what we've already covered.
All you need to do is locate the drain plug on the bottom of your pool, then remove it completely. Once that's done, water will begin flowing out slowly into a bucket or other suitable container. Once all excess water has drained out, reattach your drain plug back in place and store away any leftover items until next year!
Cleaning pool equipment
The best way to keep your pool equipment clean is to perform regular maintenance. This will ensure that the chemical balance of your water is maintained and that you don’t have to worry about any unwanted issues with your pool. Here are some tips for cleaning each piece of equipment:
- Cleaning the pump—Your pump is responsible for circulating water through your pool and keeping it fresh, so it needs regular maintenance just like any other part of your system. If you notice that there are small particles floating around in the water or if it seems like it isn’t doing its job properly, be sure to give it a thorough cleaning before calling a professional technician in order to avoid expensive repairs down the road.
- Cleaning the filter—The filter is where all of those pesky chemicals go after they have done their job in breaking down dirt and other contaminants in order to make them harmless (or at least easier) on your eyes and skin when swimming in the poolside water! It's very important that these filters stay clean so they can continue working effectively at removing these contaminants from puddles left behind after rainstorms--you don't want anything else getting into them besides what was supposed to!
Removing water from the pool pipes
Removing water from the pool pipes is a simple task. Simply use a garden hose to flush out any stagnant water in your pool's pipes, as well as any dirt and debris that may have accumulated inside them. The goal is to clear out the pipe so that it can be filled with fresh water again.
If you have access to electricity, using an electric pump can also help speed up this process. However this method is not recommended if you do not have access to electricity because it will put extra strain on the pump motor and cause it wear down faster than normal—and let’s face it: getting electrocuted by doing something stupid like trying to pull heavy hoses across wet concrete isn’t particularly fun either!
If you don’t have access to electricity, it’s best to use a manual pool cleaner. If you have one of these handy devices, simply hook up the hose and let it do its thing. An electric pump will also suffice if you don’t have access to one of these cleaners but remember that they put extra strain on your pump motor and may cause it wear down faster than normal—so be careful!
Storing your pool cleaning equipment
The first step to storing your pool cleaning equipment is to make sure it's dry. The second step is to find a good place for everything. This can be as simple as hanging up a plastic bag in your garage or shed and tucking the equipment inside. By keeping all of your tools together in one place, you'll save time searching around for them when you need them!
The third step to storage is making sure everything has a place. If you have a lot of cleaning equipment, it may be helpful to label each item with its purpose. For example, if you have two different types of brushes for vacuuming your pool (one with longer bristles and one with shorter ones), make sure they're stored together in the same bag so that you can easily find them when it's time to clean!
The fourth step to storage is making sure everything has a place. If you have a lot of cleaning equipment, it may be helpful to label each item with its purpose. For example, if you have two different types of brushes for vacuuming your pool (one with longer bristles and one with shorter ones), make sure they're stored together in the same bag so that you can easily find them when it's time to clean!
Conclusion
Now you have a better understanding of how to winterise your swimming pool with the help of the right pool servicing Melbourne. It’s not hard, but it does take some time and effort. You can do it all on your own, or you can ask a professional for help if you need to. Either way, it’s important that you get started soon!
