My GE Refrigerator is Not Cooling
Condenser Coils are Dirty
The condenser coils are commonly positioned below the fridge. They use up warmth as refrigerant passes via them. If the condenser coils are dirty, they won’t use up the warmth effectively. As particles build up at the coils, the fridge turns much less efficient, inflicting the fridge to paintings more difficult to chill down. If the coils are extensively dirty, the fridge will now no longer be capable of keeping the right temperature. Check the condenser coils to decide if they may be dirty—if the condenser coils are dirty, smooth them.
Condenser Fan Motor
The condenser fan motor attracts air even through the condenser coils and over the compressor. If the condenser fan motor isn't always running properly, the fridge won’t cool properly. To decide if the fan motor is faulty, first take a look at the fan blade for obstructions. Next, attempt turning the fan motor blade through the hand. If the blade does now no longer spins freely, update the condenser fan motor. If no obstructions are a gift and the fan blade spins freely, use a multimeter to check the fan motor for continuity. If the condenser fan motor does now no longer has continuity, update it.
Evaporator Fan Motor
The evaporator fan motor attracts air over the evaporator (cooling) coils and circulates it for the duration of the fridge and freezer compartments. Some fridges have a couple of evaporator fan motors. On fridges with the best evaporator, the evaporator is positioned withinside the freezer compartment. If the evaporator fan isn't always running, it's going to now no longer flow into the bloodless air to the fridge compartment. If this occurs, the freezer might also additionally nonetheless get bloodless, even as the fridge will now no longer get bloodless. GE fridge freezer spare parts
Start Relay
The begin relay works together with the begin winding to begin the compressor. If the beginning relay is faulty, the compressor might also additionally every now and then fail to run or won't run at all. As a result, the fridge will now no longer be bloodless enough. To decide if the beginning relay is faulty, use a multimeter to check it for continuity among the run and begin terminal sockets. If the beginning relay does now no longer have continuity among the run and begin terminal sockets, update it.
Temperature Control Thermostat
The temperature manage thermostat directs voltage to the compressor, evaporator fan motor, and condenser fan motor (if applicable). If the temperature management thermostat isn't always running properly, it can save the refrigerant machine from running. To decide if the thermostat is faulty, rotate the thermostat from the bottom placing to the very best placing and pay attention for a click. If the thermostat clicks, it isn't always probable faulty. If the thermostat does now no longer click, use a multimeter to check the thermostat for continuity. If the temperature manage thermostat does now no longer have continuity at any place, update it. General Electric Refrigerator parts
Start Capacitor
The begin capacitor presents a lift of energy to the compressor for the duration of begin-up. If the beginning capacitor isn’t running, the compressor won't begin. As a result, the fridge will now no longer cool. To decide if the beginning capacitor is faulty, take a look at it with a multimeter. If the beginning capacitor is faulty, update it.
Temperature Control Board
The temperature management board presents voltage to the compressor and fan motors. If the temperature management board is faulty, it's going to forestall sending voltage to the cooling machine. However, this isn't always a not unusual place occurrence. Control forums are frequently misdiagnosed—earlier than changing the managing board, first take a look at all the extra usually faulty additives. If none of the opposite additives are faulty, bear in mind changing the temperature management board.
Compressor
The compressor is a pump that compresses the refrigerant and circulates the refrigerant via the evaporator and condenser coils. If the compressor isn't always running, the fridge won’t cool. However, that is not often the case. Before changing the compressor, first, take a look at all the extra usually faulty parts. If you've got decided that each one of the opposite additives is running properly, take a look at the compressor.
