menu
What is the process of powdery organic fertilizer production line?
What is the process of powdery organic fertilizer production line?
Powdery organic fertilizer production line is a very simple production line in agricultural production. No matter from production or to finished products, only a few kinds of equipment can achieve the goal.

What is the process of powdery organic fertilizer production line?

Powdery organic fertilizer production line is a very simple production line in agricultural production. No matter from production or to finished products, only a few kinds of equipment can achieve the goal. Among them, the main equipment used are fermentation tipper, crusher, packaging machine, which can be made into organic fertilizer. About the powdery organic fertilizer production line process can be understood, in order to facilitate our better choice.

Organic fertilizer equipment - organic fertilizer production process

The process flow is as follows:

1. The original organic fertilizer raw materials should be mixed first, the C / N ratio should be controlled between 23 and 28, and the water content of the materials should be between 52% - 68%.

2. Requirements of raw material stacking: height and width shall be stacked according to the requirements, and the length shall be arbitrary. Attention must be paid to the place with natural ventilation.

3. Once the temperature of the material pile begins to rise, it indicates that the fermentation has started. When the temperature rises to above 60 ℃, it should be kept for 48 hours before turning over. (Note: however, when the temperature exceeds 70 ℃, the pile must be turned immediately). The lower layer materials must be turned into the middle and upper part of the pile as far as possible, so as to fully mature. The turning times are determined according to the maturity of the materials. At this time, you can use the slot type tipper.

4. After fermentation, the organic fertilizer can be directly applied, and can also be dried, packaged and put into storage.

Through the above process flow, it can be seen that the powdery organic fertilizer production line can be simply divided into three processes: pretreatment, primary fermentation and post-treatment. The whole process is indeed relatively simple and easy to operate, and it must be implemented in accordance with the regulations in the production process. The organic fertilizer production plant cost is not high.