menu
Hair Transplantation and Restoration
Hair Transplantation and Restoration
Hair transplant surgery involves removing small pieces of hair-bearing scalp grafts from a donor site and relocating them to a bald or thinning area.

Hair Transplantation and Restoration

Hair transplantation involves removing small pieces of hair from the donor area or from the hair bearing head. These grafts then need to be transferred to a bald or thinned area of the hair. The grafts made in this way are varied in size and form. Most round-shaped punch transplants contain between 10 and 15 hairs. The smaller mini-graft typically contains 2 to 4 hairs and the micro graft one to 2. Slit Grafts, which are inserted in slits made in the scalp, can hold between 4-10 hairs; strip grafts contain 30-40 hairs.

To achieve fullness, you may need several sessions. It is common to recommend a period of healing between each session. With a full series of transplants, it may take two years for you to see the final result. It is dependent on the color and texture your hair. A coarse, gray, or lighter-colored hair will provide better coverage than fine, darker-colored hair. There are 50 to 50 large plugs. Each individual will have a different ratio. Mini-grafts and micrografts may require a greater number of plugs per session. you can consider getting one of the best hair transplant in delhi if you are suffering from hair loss. 

Before surgery, you will need to trim the donor area so that the transplants can be reached and removed easily. Your doctor may use a special tool, a tube-like device made of sharp carbon-steel that removes the round graft from the donor area. This allows the graft to be replaced in any part of the area being covered. To perform other types, your doctor might use a scalpel. He will cut small sections from the hair-bearing area of the scalp and split them into small pieces that will then be transplanted into tiny holes. In order to maintain healthy skin, your doctor might inject small amounts in the scalp with saline solution periodically.  you can search for hair doctor in pune to get done with your treatment. Sometimes, the donor site may be closed using stitches. In punch grafts cases, a single stitch will close each punch site. In other types, there will be a small, straight-line wound. The stitches are normally concealed by the surrounding skin.

The grafts need to be spaced approximately one-eighth an inch apart in order to maintain healthy circulation. Later sessions will see the addition of grafts to fill in the space between the plugs. Your doctor will ensure that grafts are removed and placed in a natural manner to allow for hair growth at the donor site.

After the grafting session, the scalp is cleaned and covered in gauze. The pressure bandage will be worn for up to a week. Some doctors allow their patients not to use a bandage while they heal. you can get affordable hair transplant cost in navi mumbai

Tissue Expandement

Another method for treating baldness is tissue expansion. Tissue expansion is a common procedure used in reconstructive surgery to heal burn wounds and skin damage. Its use in hair transplant surgery has resulted in dramatic coverage, with significant coverage in a short time.

The tissue expander, which is a balloon-like device that looks like a balloon, is placed underneath the hair. The device is slowly inflated with saltwater over several weeks. This causes the skin's growth and expansion to occur. This creates a bulge underneath the hair-bearing skin, especially after several months.

The skin under the hair will have stretched enough to cover the area bald. This usually happens about two to three months after the first procedure. Ask your surgeon for more information on tissue expansion. Refer to the American Society of Plastic Surgeons, Inc. brochure, Titular Expansion: Making New Skin from Old.

Flap Surgery

Flap surgery on the head has been practiced successfully for over 20 years. This procedure can be used to quickly cover large areas that are bald and it is custom-made for each patient. The patient's goals are the most important factor in determining the size and location of the flap. 350 or more punch-grafts can be done with one flap.

One end of the hair-bearing flap is removed from the surface of the baldness. The flap with hair-bearing tissue is placed in a new position. While it remains attached at one end, the flap is sewn back into place. As your wound heals, you'll notice a camouflaged scar or at the very least, a concealment of relocated hair that grows to the edges of the incision.

Over the past few years, plastic surgeons made major advances in flap procedures. These include flap surgery combined with scalp reduction to improve coverage. Tissue expansion can also be used to enhance frontal coverage and create a natural looking hairline.

Scalp Reduce

The technique is sometimes called advancement flap surgery. This means that sections of the hair-bearing skin are pulled forward to "advance" a bald crown.

Scalp reduction is intended to cover bald spots at the top and rear of the head. It is not suitable for covering the frontal areas of the hair. After injecting the scalp with a local painkiller, a portion of the baldness is removed. The exact pattern of the cut section will vary depending on the patient. Doctors may elect to remove a portion of the scalp in an inverted, Y-shape, if there is need for high coverage. The shape of the excision may be a U, a pointed round or another figure.

The skin around and around the cut-out areas should be pulled loosely and pulled so that the parts of hair-bearing skull can be brought back together with stitches. There will be some discomfort and a bit of tugging.


हेयर ट्रांसप्लांटेशन में डोनर एरिया से या बालों के असर वाले सिर से बालों के छोटे टुकड़े निकालना शामिल है । इन ग्राफ्ट को फिर बालों के गंजे या पतले क्षेत्र में स्थानांतरित करने की आवश्यकता होती है । इस तरह से बनाए गए ग्राफ्ट आकार और रूप में भिन्न होते हैं । अधिकांश गोल आकार के पंच प्रत्यारोपण में 10 से 15 बाल होते हैं । छोटे मिनी-ग्राफ्ट में आमतौर पर 2 से 4 बाल होते हैं और माइक्रो ग्राफ्ट एक से 2 होते हैं । स्लिट ग्राफ्ट, जो खोपड़ी में बने स्लिट्स में डाले जाते हैं, 4-10 बालों के बीच पकड़ सकते हैं; स्ट्रिप ग्राफ्ट में 30-40 बाल होते हैं ।

पूर्णता प्राप्त करने के लिए, आपको कई सत्रों की आवश्यकता हो सकती है । प्रत्येक सत्र के बीच उपचार की अवधि की सिफारिश करना आम है । प्रत्यारोपण की पूरी श्रृंखला के साथ, आपको अंतिम परिणाम देखने में दो साल लग सकते हैं । यह आपके बालों के रंग और बनावट पर निर्भर है । एक मोटे, भूरे या हल्के रंग के बाल ठीक, गहरे रंग के बालों की तुलना में बेहतर कवरेज प्रदान करेंगे । 50 से 50 बड़े प्लग हैं। प्रत्येक व्यक्ति का एक अलग अनुपात होगा । मिनी-ग्राफ्ट और माइक्रोग्राफ्ट को प्रति सत्र अधिक संख्या में प्लग की आवश्यकता हो सकती है ।

सर्जरी से पहले, आपको दाता क्षेत्र को ट्रिम करने की आवश्यकता होगी ताकि प्रत्यारोपण तक पहुंचा जा सके और आसानी से हटाया जा सके । आपका डॉक्टर एक विशेष उपकरण का उपयोग कर सकता है, तेज कार्बन-स्टील से बना एक ट्यूब जैसा उपकरण जो दाता क्षेत्र से गोल ग्राफ्ट को हटा देता है । यह ग्राफ्ट को कवर किए जा रहे क्षेत्र के किसी भी हिस्से में बदलने की अनुमति देता है । अन्य प्रकार के प्रदर्शन करने के लिए, आपका डॉक्टर एक स्केलपेल का उपयोग कर सकता है । वह खोपड़ी के बाल-असर वाले क्षेत्र से छोटे वर्गों को काट देगा और उन्हें छोटे टुकड़ों में विभाजित करेगा जिसे बाद में छोटे छिद्रों में प्रत्यारोपित किया जाएगा । स्वस्थ त्वचा को बनाए रखने के लिए, आपका डॉक्टर समय-समय पर खारा समाधान के साथ खोपड़ी में छोटी मात्रा में इंजेक्शन लगा सकता है । कभी-कभी, टांके का उपयोग करके दाता साइट को बंद किया जा सकता है । पंच ग्राफ्ट मामलों में, एक एकल सिलाई प्रत्येक पंच साइट को बंद कर देगी । अन्य प्रकारों में, एक छोटा, सीधी रेखा वाला घाव होगा । टाँके सामान्य रूप से आसपास की त्वचा द्वारा छुपाए जाते हैं ।

इस grafts की आवश्यकता किया जा करने के लिए स्थान दिया गया है लगभग एक आठवीं इंच के अलावा, में आदेश को बनाए रखने के लिए स्वस्थ रक्त परिसंचरण. बाद के सत्रों में प्लग के बीच की जगह को भरने के लिए ग्राफ्ट्स को जोड़ा जाएगा । आपका डॉक्टर यह सुनिश्चित करेगा कि दाता स्थल पर बालों के विकास की अनुमति देने के लिए ग्राफ्ट को हटा दिया जाए और प्राकृतिक तरीके से रखा जाए ।

ग्राफ्टिंग सत्र के बाद, खोपड़ी को साफ किया जाता है और धुंध में कवर किया जाता है । दबाव पट्टी एक सप्ताह तक पहनी जाएगी । कुछ डॉक्टर अपने रोगियों को चंगा करते समय पट्टी का उपयोग नहीं करने देते हैं ।

ऊतक Expandement

गंजापन के इलाज के लिए एक और तरीका ऊतक विस्तार है । ऊतक विस्तार एक सामान्य प्रक्रिया है जिसका उपयोग पुनर्निर्माण सर्जरी में जले हुए घावों और त्वचा की क्षति को ठीक करने के लिए किया जाता है । हेयर ट्रांसप्लांट सर्जरी में इसके उपयोग के परिणामस्वरूप नाटकीय कवरेज हुआ है, थोड़े समय में महत्वपूर्ण कवरेज के साथ ।

ऊतक विस्तारक, जो एक गुब्बारे जैसा उपकरण है जो गुब्बारे की तरह दिखता है, बालों के नीचे रखा जाता है । डिवाइस धीरे-धीरे कई हफ्तों में खारे पानी के साथ फुलाया जाता है । इससे त्वचा की वृद्धि और विस्तार होता है । यह बाल-असर वाली त्वचा के नीचे एक उभार बनाता है, खासकर कई महीनों के बाद ।

बालों के नीचे की त्वचा गंजा क्षेत्र को कवर करने के लिए पर्याप्त फैली हुई होगी । यह आमतौर पर पहली प्रक्रिया के लगभग दो से तीन महीने बाद होता है । ऊतक विस्तार के बारे में अधिक जानकारी के लिए अपने सर्जन से पूछें । प्लास्टिक सर्जन के अमेरिकन सोसायटी का संदर्भ लें, इंक. ब्रोशर, शीर्षक विस्तार: पुराने से नई त्वचा बनाना।

फ्लैप सर्जरी

सिर पर फ्लैप सर्जरी का 20 वर्षों से सफलतापूर्वक अभ्यास किया गया है । इस प्रक्रिया का उपयोग बड़े क्षेत्रों को जल्दी से कवर करने के लिए किया जा सकता है जो गंजे हैं और यह प्रत्येक रोगी के लिए कस्टम-मेड है । फ्लैप के आकार और स्थान को निर्धारित करने में रोगी के लक्ष्य सबसे महत्वपूर्ण कारक हैं । एक फ्लैप के साथ 350 या अधिक पंच-ग्राफ्ट किए जा सकते हैं ।

बाल-असर फ्लैप का एक छोर गंजापन की सतह से हटा दिया जाता है । बाल-असर ऊतक के साथ फ्लैप को एक नई स्थिति में रखा गया है । जबकि यह एक छोर पर जुड़ा रहता है, फ्लैप को वापस जगह में सिल दिया जाता है । जैसा कि आपका घाव ठीक हो जाता है, आप एक छलावरण निशान या बहुत कम से कम, स्थानांतरित बालों का एक छिपाव देखेंगे जो चीरा के किनारों तक बढ़ता है ।

पिछले कुछ वर्षों में, प्लास्टिक सर्जनों ने फ्लैप प्रक्रियाओं में प्रमुख प्रगति की । इनमें कवरेज में सुधार के लिए खोपड़ी में कमी के साथ संयुक्त फ्लैप सर्जरी शामिल है । ऊतक विस्तार भी ललाट कवरेज को बढ़ाने और एक प्राकृतिक लग रही सिर के मध्य बनाने के लिए इस्तेमाल किया जा सकता ।

स्कैल्प कम करें

तकनीक को कभी-कभी एडवांसमेंट फ्लैप सर्जरी कहा जाता है । इसका मतलब यह है कि बाल-असर वाली त्वचा के वर्गों को गंजे मुकुट को "अग्रिम" करने के लिए आगे खींचा जाता है ।

स्कैल्प की कमी का उद्देश्य सिर के ऊपर और पीछे गंजे धब्बों को कवर करना है । यह बालों के ललाट क्षेत्रों को ढंकने के लिए उपयुक्त नहीं है । एक स्थानीय दर्द निवारक के साथ खोपड़ी को इंजेक्ट करने के बाद, गंजापन का एक हिस्सा हटा दिया जाता है । कट सेक्शन का सटीक पैटर्न रोगी के आधार पर अलग-अलग होगा । डॉक्टर खोपड़ी के एक हिस्से को उल्टे, वाई-आकार में हटाने का चुनाव कर सकते हैं, अगर उच्च कवरेज की आवश्यकता है । छांटना का आकार एक यू, एक नुकीला गोल या एक और आंकड़ा हो सकता है ।

कट-आउट क्षेत्रों के आसपास और आसपास की त्वचा को शिथिल रूप से खींचा जाना चाहिए और खींचा जाना चाहिए ताकि बालों वाली खोपड़ी के हिस्सों को टांके के साथ वापस लाया जा सके । वहाँ हो जाएगा कुछ परेशानी है और एक बिट के tugging.