Netgear Orbi login steps using the Orbi app

 All of such issues can occur due to firmware failure or an old version of the firmware. In the following blogs, you will get the solution for each Orbi login and setup problem. You need to download the Orbi app on your device and follow the on-screen instructions.

1. When you see a login pop-up screen, fill in the username and password [admin & password], then click login.
2. Have you already connected to the orbilogin.com WIFI network? This means you have already logged into the web interface of your Orbi router. 
3. Therefore, begin with the following described steps. Leave the upper part of the step.
4. Go to the wireless settings of your router on the Basic home of orbilogin.com or orbilogin.net.  
5. And then, get the option for username and password.
6. Type the new username and password that must be strong and unique from the rest.
7.  Just type the password two times.
8. To get it to confirm, then hit the key [APPLY] or [SAVE].a

 And then your Netgear orbi login WIFI name and password setup is all done using orbilogin.com

 Orbi login password change via orbilogin.com

1. As you launch the app, a login screen will appear just on the display of your mobile. 
2. In the Orbi login app, do not enter the orbilogin.com or orbilogin.net web link. 
3. The essential part of this orbi app, you don't need any default gateway. 
4. As you launch the orbi app, you get the login page directly.  
5. On the Orbi login page, it will ask to enter the user name and the password. 
6. The username and password are the same you have entered while login into www.orbilogin.com. 
7. Here on this Netgear Orbi login page, click the LOGIN tab after putting up the login credentials.
8. Then for the remaining process, you have to follow the orbi app instruction that will pop up one after another on your mobile's display.

Orbi login SSID & password change using Orbi app

Netgear Orbi login SSID and password change are very interesting with the Netgear Orbi app. It does not require any default gateway or the www.orbilogin.com address to access the web interface. So, let us begin the Netgear Orbi login WIFIname and password change process with the following steps. 

• Apart from WIFI settings, the Orbi app helps you to operate the advanced settings of your router. 
• You can set up the bandwidth control, parental control, guest mode setup, security encryptions, etc.
• First, you have to download the Netgear orbi app from your app store. 
• Have you already downloaded the orbi app? Then leave this step, and launch the app.
• Launching the Netgear Orbi app will take you to the Orbi login page directly. 
• It will directly ask you to enter the username and password as admin and password.
• Then, press the SIGN IN button. And amazingly, within a few seconds, you will get the home page or the dashboard of your Orbi app.
• Move towards the WIFI settings of your orbi app. it is at the top left page of the orbi app dashboard. 
• In the wireless section, enter the new Orbi login password and the username.

The username or the WIFI name will be required once. Enter the WIFI password twice. In the last step, the dashboard will instruct to save the settings through the [SAVE OR APPLY] tab. Hit the save tab, and get the settings done after a few minutes. 

Orbi firmware update is required to upgrade the router 

Tip: -The starting will require you to connect your Orbi routerlogin with the computer. 

Are you already connected? Then you can take a jump to the next step. Now your firmware update process has been finalized and completed. Without an updated firmware, it is impossible to get accurate output out of your Orbi router. So, let us update our Orbi WIFI router with the newly released firmware. 

Manual firmware update using orbilogin.com

In this step, first, go to the Orbisupport site, and get the latest Orbi firmware for your Orbi router. To get the firmware, you are to enter the exact model number or the serial number of your router. Then if you get the alert for the new firmware update, you should click to download. 

1. Then extract the file from the orbi login zipped format to a folder file of your desktop. 
2. You should save the file securely to get it back safely while uploading.
3. Login is necessary to the orbilogin.com home page of your router.
4. open up browser>enter orbilogin.com or http://192.168.0.1
5. Click enter or OK tab> then on the Authentication page>enter login credentials.
6. In the SSID field >enter ADMIN> then in the Password field> enter the login password.
7. Get the basic home page of orbilogin.com> go to>Advanced>Administration>at last firmware update.
8. Bring the saved file>upload the file>click browse>do not break the process

OrbiWIFI router also covers up to 3500 square feet area along with high-performance wifi. RBK kit includes a WIFI router and Wall Plug Satellite. The wall Plugsatellite is best for easy placement. Do you face any trouble while setting up your Netgear Orbi tri-band router? Then, call our customer care experts anytime you need them.