It’s crucial to get a proper protection mask from a 3-ply clinical face masks supplier, with the coronavirus on the loose. With the lack of masks, several fake masks are emerging that would not defend you.
During the Covid-19 pandemic, the 3-ply surgical mask became the best-looked product for so many shopping. The consistency of the different products may however differ considerably, although the masks can look the same.
Choosing the right one:
An appropriate surgical mask typically consists of three layers, including an external non-woven, hydrophobic, middle melt-blown, and an internal non-twisted, soft absorbent sheet.
Their functions are unique to these three layers:
- The outer layer should repel water, blood, and body fluids.
- The middle melt-blown layer is vital to an OM, it should be built to prevent germs from entering the mask or leaving it.
- The inner layer should absorb the water, saliva, and spit.
- To understand the authenticity of these masks from a 3 ply face mask manufacturer in Dubai, you can perform a number of tests. With these done, you will definitely understand how good your masks really are.
Visual Test -
You can see a rather clear 3-layer when you open your mask. The 3 levels will normally include a non-weaved external hydrophobic (translucent) layer, a middle melt-blown (white) layer, and a non-woven (green, blue, or white) internal soft-absorbent layer. It is not the 3-ply mask if it does not possess these 3 layers.
Water-resistance Test -
The outermost layer is water-resistant. Put water on the outside layer and you can see that the mask is correctly repelling the water.
It is not a 3-fold mask if the other side gets wet.
Fire-resistance Test -
The center layer of an OM is a melt-blown cloth, not papered, which means that it would not burn like paper if you light it with flames. Rather, without heat, it melts. It is not a 3-ply mask if the mask catches fire.
Light Transmission Test -
It should not be too porous that the inner layer used to prevent bacteria from entering or leaving the mask. This means that the mask is able to capture the proportion of bacteria it should. If the inner layer of the mask is too brittle, the mask is not 3-ply.
Electrostatic Adsorption Test -
The melt-blown layer has an electrostatic effect. If the melt-blown layer is torn into pieces, you can experience the electrostatic adsorption, but due to its broad electric charge, you can also adsorb the melt-blown layer in stainless steel. It is not a 3-ply mask if the mask does not adsorb electrostatically plates.
Absorption Test -
In the inner part, humidity like saliva, mucus, and sneeze droplets is always absorbed. This guarantees that the mask can hold droplets that do not persist splattered on the face of the user when a person sneezes. If the inner layer of your mask does not retain moisture, it is not an effective 3-ply mask.
Breath Test -
A 3-ply surgical mask is known to isolate droplet filters by adsorbing them electrostatically into the surface so that a middle melt-blown layer cannot penetrate the mask. The interior layer is made to withstand water, sweat, and spit. This will make it incredibly difficult to extinguish the fire with your smoke. If by using the mask, you can quickly extinguish a fire with your mouth, it is not a 3-ply mask.
Types of surgical masks:
The operating masks from a disposable 3-ply face mask exporter include all the ordinary surgical masks and the surgical mask N95 according to its roles. There are three types of operatory masks, the ear loop, the binding, and the headband when it comes to how the masks are secured.
