Frozen pipes during winter can cause a large burden on any household pipe system and the process of fixing it is quite tiring or even expensive if you let it be handled by a professional plumber. Keep in mind that when water freezes and expands in the pipe, its tendency will create a gap that will cause water to explode from the pipe and cause extraordinary water damage in your home which results in high costs for repair and replacement of damaged equipment or furniture. However, this terrible scenario can be prevented if you know how to fix frozen pipes without even calling specialist help.
After you notice that water starts to freeze on the pipe in your plumbing pipe system, you must take some immediate action so that the damage to the pipe will be stopped. If you have observed that the problem is not at the worst level so far and there is no damage that is seen in the pipe, then simply disburse the buildup of ice. Thawing ice can be easy, especially if the pipe is not completely frozen. However, it is not fully recommended that you use the torch when we melt the frost in the pipe; This is a common mistake of some people as if not handled correctly can cause fire to the house. Although the heat produced by the torch is sufficient to melt the ice, this must be done carefully and with the maximum attention.
In melting the frozen pipe, the first step is to close the valve from the outside water source then open the faucet. If the water will come out for drops or not at all then it is the implication of the frozen pipe. It is recommended that you melt the ice from end to end, not focused only on the middle area because the pressure of trapped steam can cause pipes to explode. Usually, frozen pipes occur in places where there is not enough heat accumulation such as the outer wall or crawling space, so it's better to start in this area.
The most common and easiest way to melt the pipe to remove ice is to use hot water and towels. The towel must be heavy enough to hold hot water then wrap it in the frozen pipe area. Pour hot water over the towel that covers the pipe and keep doing this until the ice is completely melting. Don't forget to put a bucket under the pipe that will get excess water.
In addition, you can also use a hair dryer in melting ice but the process can be slower than using hot water. In the absence of a hair dryer, you can use a hot light as a heat source, you can continue with disbursement. These are just a few techniques in repairing frozen pipes at home and always considering your safety before doing the task. You also can consult with local plumbers in Katy that can resolve this issue easily with no time.
