Introduction To Embroidery Digitizing
Any thread product that will be sewn embroidery digitizing successfully on sewing machines employing the 301 and 304 stitch types will generally work for embroidery applications.
When a shiny look is preferred for embroidery, the most popular types of thread are:
- Continuous trilobal polyester filament
- Mercerized cotton
- When a matte appearance is preferred, a garment thread can be used.
- Polyester wrapped in polyester
- Polyester wrapped in cotton
- coats
If sewing threads are used for embroidery, they must be carefully tested to avoid problems with the garments. These threads are developed for industrial sewing machines where speeds can exceed 4,000 rpm. The quality and quantity of lubricant used in these sewing threads is different from that of embroidery threads and helps to minimize friction and abrasiveness while the machine is running at these higher speeds. If sewing threads are used for embroidery, the lubricant can potentially migrate from the thread and stain the fabric. The lubricant used for the embroidery threads is lower and more controlled to allow high performance, exceptional quality and to minimize the risk of staining.
Continuous filament rayon and trilobal polyester embroidery threads are now in widespread use throughout the world.
Cotton
Polyester yarns, in particular, are now becoming more popular due to their ability to withstand more demanding washing and dry cleaning standards. Polyester has advantages over rayon in terms of superior wet and dry strength, abrasion resistance, and shade / color resistance. Coats offers a wide range of creative products in embroidery threads and embellishments. The threads are metallic sewing a popular popular choice, especially suitable for decorative stitching on all types of denim clothing and provides a glossy look for special effects. Whether metallic, glow-in-the-dark , reflective or matte effect embroidery , it's your choice.
Choose the right backs and liners for each job
coats
- Almost anything that edging will require embroidery digitizing services a backing or a siding or a combination of both.
- The backs are used to help support the fabric while it is being sewn. The backs continue to support the design once it is sewn.
- Coatings are used on high wales fabrics such as corduroy and some knits. The liners help to compact the wales so that the dots don't disappear into each other, preventing the wales and ends of the fabric from sticking out of the design.
- Garment fabric stability, stitch density, color, stitch length, stitch speed, embroidery size, and design stability are just some of the variables that can influence the selection of the backrest.
- The stretch of the fabric is probably the most important factor in the selection of backrests. The backing must be stable enough to prevent movement during the sewing process. The structure of a fabric (knitted fabric) can be a better indicator of stability than weight alone. The backrests are available in different weights. Check with a backing provider to make sure you are making the correct choice for the fabric being embroidered.
The most common types of embroidery backing are:
Cuts - for non-stable fabrics
Tear-aways - for stable fabrics
Peel and Stick - for those hard to place places
Hydrostick - for fabrics containing lycra, elastane or spandex
How do I estimate the yarn consumption?
jeans
Bobbin thread
An estimated 2.3 meters of bobbin thread per 1,000 stitches is a good starting point. This means that, like most embroiderers, you use undyed bobbin threads. The bobbin thread tensions are tighter than the needle thread tensions.
How do I estimate the stitch count?
Estimating or calculating possible stitch counts in digitized embroidery designs is just that - "guess". It can be done and there are a few methods to estimate accurately, but there is no foolproof way to know before digitizing how many stitches an embroidery will have.
coats
- You can purchase a clear plastic grid with 1 "blocks. Lay this grid over the illustration and count the number of 1" blocks that the grid covers. Then, from a chart accompanying the grid, you can see how many stitches per 1 "block. This method provides an estimate as it does not take into account the type of stitches that are used in the design.
- Or, you can multiply the length times the width of a layout. Then multiply that number by 2. This is equal to the amount of 1,000 points. For example: 1 ½ "(length) x 2" (width) = 3 ", then 3 X 2 = 6. This particular design would have 6 to 1,000 stitches or 6,000 stitches.
- Different types of stitches will have different stitch counts. In general, one square inch of a solid block of color will have approximately 1,250 fill points. A linear inch of a satin will have 200 stitches, while a linear inch of stroke will have 50 stitches.
- Lettering a standard block without online embroidery digitizing serifs at ¼ "high will have approximately 100 stitches per letter, while ½" letters will be doubled. If the font is serif type, there will be approximately 125 stitches for each ¼ "letter and then 250 stitches for a ½" letter.
