Why the turbo hard fast door cannot be closed normally during use？
The rapid development of my country's industrial economy has prompted an increasing demand for large turbo hard fast doors. Turbo hard fast doors are widely used in various industrial plants, logistics channels, workshops, warehouses, machine rooms, garages and other places. Sometimes, the turbo hard fast door cannot be closed normally. What is causing this? Let's follow the editor to analyze the reasons for the hard fast door fails.
1. When the turbo hard fast door cannot be opened normally, first check the controller of the turbo hard fast door: if the green light of the controller is on, the manual and automatic switches cannot be operated at this time; you must hold down the controller The reset button for more than 5 seconds, the red light will be on and the green light will be off after release; if the green light is still on after resetting, please check whether the controller of the turbo hard fast door has corresponding items in the sensing area to make the turbo hard fast The door is the sensor in working condition.
2. In the turbo hard fast door automatic mode, the door body still hasn't dropped after the previously set delay closing time is exceeded. Check whether the infrared indicator light is red or green. Green is normal, and red indicates failure. Adjust the position of the infrared appropriately. Until the green light turns on.
3. Check whether the door body of the turbo hard fast door is jammed or whether the strap falls off.
4. The button of the opening and closing control system of the turbo hard fast door may be damaged and cause malfunction. Changing the malfunctioning button will not affect the use, but the turbo hard fast door should be maintained in daily use. If damaged parts are found, the maintenance personnel should be notified to repair them in time, and the parts that cannot be repaired should be replaced with good ones, and the hidden dangers should be eliminated.
5. Deformation or failure of the switch stroke of the turbo hard door will cause the opening and closing control of the turbo hard door to be abnormal. At this time, we must check where the problem is, if the parts inside are broken If it is, it is necessary to replace the broken contact piece or micro switch. In the test run, you can continue to use it if there is no problem.
6. If the turbo fast hard door has the problem of screw loosening, the backing plate may have a position shift, and the screw must be tightened in time. If the screw is slippery, replace the screw and restore the backing plate. Bit.
7. The last point is that the door body of the turbo hard fast door runs repeatedly: When the door body is running repeatedly, first check whether the door body of the turbo hard fast door is in the process of descending or whether the curtain body itself cuts off the infrared condition, and take corresponding measures. Ways to exclude.
When the hard fast door fails, it needs to be overhauled in time. Nowadays, the demand for the use of large turbo hard fast doors is increasing. Turbo hard fast doors are widely used in many fields. It is necessary to pay attention to safe operation during normal use.
Service hotline: 19952701625
Contact: YEYINGYING
FAX:19952701625
Email: sales@bastdoor.com
Address: 10#Hongxiang Road, Hudi Town, Binhu District, Wuxi
