maintenance recommendations for security window film
Putting a security window film on the windows of the home can not only block ultraviolet rays and reduce the damage to the body, but also increase the safety factor of the glass, and it is not easy to break into slag. But if you want to change the film after the window film is applied, how do you remove the window film? And how should we maintain the security window film after the security window film is applied? Let's look at the maintenance methods of the security window film.
How to remove the security window film?
1. Some security window films can be wiped off with an eraser. If they can't fall off, wipe them with fengyoujing, so that they can be easily washed off.
2. If it is a very sticky security window film such as double-sided tape, take a few drops of the light-removing liquid and wipe it slowly. The area of your sticker is too large.
3. The security window film can be cleaned with acetone solution. Do not use too large a dosage. The dissolution rate of acetone is not very fast, but the volatilization rate is fast. Wear rubber gloves when you use it to protect your hands. Acetone is not corrosive or use a towel dipped in gasoline to wipe a few more times, and then wipe with a clean cloth. You can also moisten it with gasoline for a while and then scrape it lightly with a spatula.
How to maintain the security window film?
1. Do not move the glass within one week after construction. Do not scrub the security window film with water within 15 days after the window film is installed.
2. Do not hang any objects on the security window film with suction cups or fix any objects with glue, and do not stick any sticker decorations on the security window film.
3. Do not place corrosive chemicals next to the safety film window, so as not to volatilize and corrode the film surface or react with the metal ions of the film body
4. Do not scratch the surface of the glass film with hard objects. Customers should wipe the water vapor on the film frequently. It is recommended that customers apply glass glue around the glass.
5. When cleaning the glass security window film, spray the cleaning agent slightly and evenly on the surface of the window film, and then gently dry the window film with a clean, soft cotton cloth or absorbent cloth. The cotton cloth and absorbent cloth often need to be wrung out. The pure rubbing alcohol contained in cotton/absorbent wipes will quickly dissolve huge stains and fatty fingerprints.
6. If the stain is not cleaned, spray the cleaning solution again, and use a soft rubber wiper to wipe the security window film horizontally from top to bottom until it is dry. Use a towel to dry the edges of the security window film.
7.Because of the use of adhesive tape, instant stickers or decals on the glass security window film, the glue or glue remaining when these materials are removed, you can use a soft clean cotton cloth dipped in acetone to gently scrub the contaminated area. The glue remaining on the security window film is quickly and completely removed. A small amount of acetone will not damage the polyester film, but it can immediately dissolve and completely evaporate the adhesive and most spray paints.
The above are the ways to maintain the security window film. Have you benefited a lot after reading it? If you encounter the problem of window film in the future, it will be solved. After reading it, did you discover that the window film is really beneficial, not only can block the ultraviolet light, but also increase the safety factor of the glass.
Contact Us
+86 0760-22738566
ravenyang@ankefilm.com
No 166,Tan bei Wei Min Road, Do Sheng Town, Zhong Shan City, Guang Dong Province, China
