linksyssmartwifi.com : How to setup linksys smart wi-fi router
The Linksys wireless routers are one of the best networking hardware. These high-end wireless and wired networking devices can be used in the network only after their successful configuration. The users are required to go through the device setup so it can be made usable in the network. Updating the Linksys smart wireless routers is an integral part of the router usage.
The Linksys router needs to be accessed either through http://linksyssmartwifi.com or through the Local IP 192.168.1.1 or 192.168.0.1 in order to get to the setup web page of the router for update.
First and the foremost thing to do is that the user will be required to download the firmware update file from the downloads section of the Linksys website. Below is the detailed guide of updating the Linksys firmware through linksyssmartwifi.com.
Important- It is very important to note that any type of core processes being done on the router shouldn’t be interrupted in any case. If any interruption occurs between any of the processes, it can lead to the firmware corruption and the device may even lose all the data stored in it. Thus making the device unusable.
The Linksys smart wifi router will now be configured with the latest settings and your device will now be ready for any future networking purposes.
The default router login password for the Linksys wireless is “admin” or “password”. This is the default login password for the router; however, it is strongly advised to get the passphrase changed after the router is configured for the first time.
Follow the steps described below to get your router’s password changed.
Although the Linksys smart wifi routers are very reliable and efficient in their working, sometimes equipment tends to give its user trouble due to their own mishandling or misuse of the device. In those cases what you need to do is just check the cause for the router admin page issues. There are several reasons due to which you might not get to the Linksys router’s admin page. These are listed below.
Incorrect web and IP address used for setup page access.
This is the most common mistake we see on a daily basis. The Average user of the Linksys smart wifi router is either unaware of the correct spellings of the local IP of the router or the local web address of a router which is “linksyssmartwifi.com” and “192.168.1.1 or 192.168.0.1”.
Make sure to specify the correct web and IP address for accessing the setup interface of the router.
Improper Ethernet cable connection
The Improper Ethernet cable connection is another reason behind the user’s router access failure. Here is what you can do, just make sure that the Ethernet cables are connected to their designated ports. Also, check the Ethernet cables for any possible wear and tear. The Ethernet cable type is also an important factor, the RJ45 Ethernet cable is only compatible with these networking devices.
Problems with the web browsers
One other major point of concern is the use of web browsers for accessing the Linksys smart wifi router setup page. Always use the full-fledged and updated versions of the web browser in order to successfully access the Linksys wireless router’s setup page.
Linksys smart wi-fi connection methods
In order to make the router or modem device usable, the device needs to be configured as we know. But in order to configure the device successfully, a proper hardware interconnection is needed. The Linksys smart wifi router can be connected to the computer and modem device through one of the below-mentioned methods.
Ethernet cable connection- The Ethernet cable connection is the most preferred way of getting your router device connected to the computer system or the modem. However, the users most of the times connect their router devices to the computer system over wifi only.
Now let us show you how you can easily get your Linksys smart wifi router connected to the computer system via LAN (Ethernet cables).
WPS stands for wifi protected setup; this is the fastest available wireless connection method. In the WPS connection method, the user is required to push the WPS button on the devices. Read the more detailed guide about setting up the Linksys router up with the computer system below.
Your router will now be connected to your computer system and you just need to perform the router configuration as mentioned above. Read and perform the instructions mentioned above in the article and your Linksys smart wifi router will be configured within no time.
Linksyssmartwifi.com linksys routers are although very efficient in delivering the wireless data transmission and wireless signals as well. However, it is important to note that sometimes, unwarily or deliberately the users create some obstacles between the router and the connecting wifi device like smartphones or laptops etc.
Now, go through the list of possible causes and solutions for poor wifi signals in Linksys routers.
Solutions to the above-mentioned issues
Get all the wireless range settings right on your Linksys smart wifi router. Select the correct frequency bands, Check for any issues in the Wireless channels.
Point the external antennas away from each other to get the wifi signals spread over the entire space.
Try to remove all the tangible and intangible obstacles between the router and the connecting device like smartphones and laptop computers etc.
Updating the firmware of the Linksys wireless router always helps in increasing the efficiency and reliability of the router device. It is most likely to happen that when you update the firmware of your Linksys wireless router, the wifi signal strength is also going to increase.
