views
By using one of the new conversion systems on your Spotless CarWash Deionized Water System you will now not only put 40% more resin into the machine but by doing away with the cartridges (which often leak at the seals) your system will produce far more DI water that the current system.
What is required to convert a spotless water DI system to the new DI system is quite straightforward. You simply remove the cartridges from your Spotless water DI systems and install the new feeder tubes (see photo). Refit the blue outer containers(without using the cartridges) to the Spotless water DI systems and then screwthe cartridge body back onto the housing with the feeder tubes inserted directly into the resin.
This way your standard Spotless water DI systems machine will hold 40%more resin than it would if using the internal plastic cartridges. We can also supply a 1/2 cubic foot bag of resin (equivalent to 3 Spotless cartridgerefills) at approximately half the price of the Spotless resin. By using thissystem you will benefit from using 100% of the resin inside the housing asthere will be no leaking seals to contaminate the DI water.