menu
How To Reset Honeywell Thermostat
How To Reset Honeywell Thermostat
Here in this place, we get to know the complete guide to How To Reset the Honeywell Thermostat
and also full details about the thermostat.

Honeywell thermostats are known as modern household temperature control devices.  Modern, digital, and smart thermostats have made temperature control easier with programmable features and scheduled heating and cooling. You can find multiple models of Honeywell thermostats, including heating and cooling models. Heat pumps, Wi-Fi models, and so on.

Honeywell thermostats usually offer consistent performance, But sometimes a little bit of manual intervention makes the machine more effective. After all, the weather often remains unpredictable, and adjusting the thermostats for one or a few degrees often makes your home more comfortable.

Here are the reset types you might have to do to bring your thermostat to working condition.

Reset of Honeywell Thermostat

Factory Reset – This reset will bring your thermostat to the setting you got it as new. It will also delete all the previous settings and schedules you would have made previously.

Wifi reset – It only works on the thermostat with Wifi feature, resetting Wifi will make your thermostat forget the Wifi it was connected to.

Schedule reset – resetting the schedule will clear all the schedules that you used to control your thermostat. 

Model specific reset – For this, you will have to find out the model of the thermostat available on the front of the thermostat or you might have to check the manual to find your thermostat model.

Also, read: How To Setup Amazon Firestick without email

If your home feels uncomfortably warm or cold, your thermostat may need to be reset. Here is a step-by-step guide to resetting your Honeywell thermostat:

  • First, deactivate the thermostat to avoid any battery leakage.
  • Next, unscrew slowly to detach the machine from its wall plate. Take care not to damage the screen or harm the machine in any way.
  • To take out the batteries, carefully open the battery compartment after detaching it. To open the compartment, use a coin.
  • Reinsert the negative lead into the positive terminal, and then into the negative pole. Keep the batteries in this position for 5-10 seconds.
  • Replace the battery in the reverse order after removing it.
  • Last, put the machine back in its original spot and switch it on. There you have it- a reset thermostat!

Also, read: Bosch Dishwasher Troubleshooting

 Honeywell 1000 and 2000 Series Thermostats

For older models like the Honeywell Pro 1000 and 2000 series, the process of performing a factory reset is somewhat involved. Even so, it shouldn’t take you longer than a couple of minutes. Here’s how to take care of business:

  • Turn off the thermostat. You can do this by flipping the control switch on the bottom of the unit to the center position.
  • Head to your home’s breaker box and shut off the power to the circuit controlling your thermostat. If you’re not sure which one it is, you may have no choice but to disable the power to the whole house temporarily.
  • Remove the thermostat from the wall by gently lifting it away from its mounting plate.
  • Take the batteries out of the unit and reinstall them the wrong way (yes, you read that right). The batteries’ positive poles should now be aligned with the negative poles in the battery compartment and vice-versa.
  • Wait 5-10 seconds for the desired changes to take effect.
  • Remove the batteries again and reinsert them with the correct orientation.
  • Place the unit back on its base. Check to make sure it’s securely attached before proceeding.
  • Restore power to the circuit and turn the thermostat back on.

Honeywell 4000 Series: If your thermostat falls under the Honeywell 4000 Series, make sure the device is on. Then, locate the button titled “Program.” Press and hold the button down for several seconds. You may need to use a paperclip, a nail, or another object that has a sharp point. Make sure you do not go all the way through the thermostat. After you hold the button down for several seconds, release it. The thermostat should reset to factory settings.

Honeywell 6000 Series: If your thermostat falls under the Honeywell 6000 Series category, make sure the thermostat is turned on. Then, press and hold the “Fan” button as well as the “Up” arrow. Hold these for about five seconds, then release them. Press the button on the bottom left until you see “39” on the display. Press the down arrow keys until the number changes to “0” Finally, press the “done” key, and the thermostat should be reset.

Honeywell 7000 Series: If you have a Honeywell 7000 Series thermostat, you need to turn the thermostat off. Then, cut the power to the device. Remove the thermostat from the wall plate, and you should see two separate batteries. Remove them and insert them in the opposite direction for approximately 5 seconds. Now, put the batteries back in the right way once again. The display should turn on. Restore the power to the thermostat, and it should be completely reset. 

Honeywell 8000 Series: If your Honeywell thermostat falls under this category, press the “system” button on the screen. Then, press and hold the blank button in the center of the screen. Hold it down for approximately five seconds. There should be an option that says “reset to factory settings.” Select this option, and the thermostat should reset to factory settings. 

Also, read: How to Fix Java Virtual Machine Launcher Error