Introduction
The CD4060BMT counter comprises an oscillator section as well as 14 counter stages with ripples. The oscillator configuration permits the design using either RC as well as Crystal oscillator circuits. RESET input is included that resets the counter back to all-O's condition and also disables the oscillator. A high value of the RESET line triggers its reset purpose. Counter stages are master-slave flip-flops. The counter's state is advanced by one step in binary order based on the negative shift (O). All outputs and inputs are completely buffered. Schmitt trigger on the in-pulse lines allows infinite input-pulse rise and fall time. The CD4060BMT counter is general use and is suitable for control counters, timers, frequency dividers, and as well as time-delay circuits.
Features
12 MHz clock speed at 15 V
Common reset
Completely static operation
Outputs, inputs, and buffered outputs
Schmitt trigger input-pulse line
Tested 100% for quiescent currents at 20 V
Asymmetrical, standardized output characteristics
Parametric ratings are available for 5V and 10V
Diagram
CAD Model
Symbol
PCB Footprints
3D Models
Specifications
Supply Chain
Factory Lead Time - 6 Weeks
Physical
Number of Pins - 16
Weight - 141.690917mg
Technical
Operating Temperature - -55°C~125°C
Circuits of CD4060BMT
Alternative Models
CD4060BMG4, CD4060BM96, CD4060BM
Where to Use CD4060BMT?
In general, there are two types of counters. In this article, the CD4060BMT counter is general use and is suitable for control counters, timers, frequency dividers, and as well as time-delay circuits. Today, easybom introduces the relative information about What are counters used for.
Click the link to check more details
https://www.easybom.com/blog/a/an-introduction-of-the-cd4060bmt-counter
