1. The bending angle can be set from 1-120°, and the pedal control switch; 2. Safe operating system, no worries about safety during operation; 3. It is convenient to change moulds for different tasks and improve work efficiency; 4. Using 700Par hydraulic system, low noise, durable and sturdy; 5. The open worktable can ensure that the processed workpiece is not deflected after bending; 6. The punching hole has no burrs, the cutting is flat, the angle is accurate, and a large amount of processing can be repeated quickly; 7. Equipped with cutting and punching double positioning ruler, equipped with bending row and bending pipe angle indicator ruler.
What Equipment is Needed to Make a Bus Duct?
1. Shearing machine, folding machine, and punching machine are required to make the busway shell, which can be processed by outsourcing; 2. The surface treatment of busbars, including pickling and tin plating, can be processed by outsourcing; 3. The surface treatment of the shell, including pickling, phosphating, and spraying, can be processed by outsourcing; 4. The shrinkage of the heat-shrinkable tube requires a heat shrink gun, and another wallpaper knife, scissors, etc.; 5. The busbar workshop is divided into pre-set procedures, packaging, polishing, outsourcing, assembly, packaging, and small parts; 6. The first set of procedures: making the shell, cutting the copper bars, bending the copper bars, making side panels, making the plates and brackets of the plug-in box shell, etc.; 7. Packing row: it is the insulating material of the copper row; 8. Polishing: is to polish the copper row; The packaging line is tin-plated, silver-plated, etc., and the shell is painted or otherwise processed; Assembly is the assembly of busbars or plug-in boxes.